Need Help?

Get in touch with us

searchclose
bannerAd

Newton’s First Law

Grade 8
Aug 22, 2022
link

Key Concepts

  • Inertia
  • Mass

Introduction: 

In this session we are going to learn about inertia and mass and differentiate between them. 

Explanation: 

Aristotle’s fallacy: 

Aristotelian law of motion states that “an external force is required to keep a body in motion”. 

Example: A toy cart is at rest. When a boy pulls the handle attached to the cart then the cart comes into motion and when the boy releases the handle the cart comes at rest. 

The fallacy of Aristotelian law of motion:  

It was proved wrong by Galileo Galilei and Isaac Newton.  

parallel

According to Aristotelian law, a force is required to keep a body in uniform motion. But no force is required to move a body in uniform motion. 

Galileo’s Observation: 

Galileo Observed that a smooth ball rolling on a smooth surface would roll to the height from which it was rolled, regardless of the angle of incline of the ramp. He reasoned that it must behave this way because whatever caused it to accelerate down the slope also caused it to decelerate up the ramp. 

Galileo's observation 

He concluded that: 

  • The state of rest and the state of uniform linear motion are equivalent. No net force is acting in both cases.  
  • Therefore, there is no need to apply an external force to keep a body in uniform motion.  
  • An external force is applied to encounter frictional or any other force so that the forces are balanced.  

Newton’s first law of motion 

Everybody continues to be in its state of rest or in uniform motion in a straight line unless and until compelled by an external force to change its state of rest or of uniform motion. 

In simple words, if the net external force on a body is zero, its acceleration is zero. Or acceleration can be non-zero only if there is a net external force on the body. 

This is also known as the law of inertia. 

parallel

Inertia:  

An object at rest prefers to stay at rest and an object in motion prefers to stay in motion. 

The tendency of an object to stay in the original state of motion it is in is known as Inertia. 

It is the natural tendency of an object to resist any change in its state of motion. 

Tendency to stay at rest 
 Tendency to stay in motion 

Mass:  

The measure of inertia is mass. 

The heavier the object is, the greater is its inertia or resistance to change to its state of motion. 

Difference between inertia and mass

Questions and answers 

Question 1: The bucket filled with sand is more difficult to push. Why?  

Question 1 figure 

Answer: 

The bucket filled with sand has more mass as compared to the empty bucket. As the mass increases the inertia also increases and thus the resistance to the state of rest. This is the reason why it is more difficult to lift the bucket filled with sand.  

Question 2: What is the relationship between mass and inertia? 

Answer: 

As the mass increases, inertia increases.  

As the mass decreases, inertia decreases. 

Question 3: List the difference between inertia and mass. 

Answer: 

Answer 2 figure 

Summary

  • The tendency of an object to stay in the state of motion it is in is known as Inertia.
  • The measure of inertia is mass.
  • As the mass increases, the inertia increases.
  • Newton’s first law is known as law of inertia.

Comments:

Related topics

Effects of Force: Types, Examples, and Applications

Effects of Force  Key Concepts What Is Force? A force comes into play when two or more objects interact with each other. This force when applied to an object by another, gives rise to some kind of change in the state of motion of an object. In this section we will be looking at these […]

Read More >>
Electrical Components

Electrical Components and Symbols Explained with Diagrams

What Are Electrical Components? Consider the electrical components as the building blocks of any circuit. These are the actual components that cause electricity to do what you want it to do. Every switch you flip, every fan that spins, every charger that doesn’t overheat relies on these small parts doing their job quietly. You rarely […]

Read More >>

Friction: Advantages and Disadvantages Explained

Friction is one of the most important concepts of friction, and today we will learn what friction is and everything there is to know about it. What Is Friction? According to Britannica, Friction is the force that stops one solid item from sliding or rolling over another. Frictional forces, like the traction needed to walk […]

Read More >>
Types of Waves

Different Types of Waves and Their Examples

Introduction: We can’t directly observe many waves like light waves and sound waves. The mechanical waves on a rope, waves on the surface of the water, and a slinky are visible to us. So, these mechanical waves can serve as a model to understand the wave phenomenon. Explanation: Types of Waves: Fig:1 Types of waves […]

Read More >>

Other topics